Set-up & Configuration

Round Spa 2.2M

Learn how to properly set your spa up and configure it with our video guides.

Forklifting and transportation

How to uncrate your Hot Tub, Spa or Bath

Site and setting in place

How to fit and use the drain valve

How to connect the power on our round spa pools

How to remove the access door on our round Spa Pools

Filling your spa

How to secure the cover

How to access the filter

SV2 Setting the date and time

SV2 Setting the water temperature

SV2 Pump operation

Stoked Spa Away Mode

SV2 Snooze Timer

SV2 Power Save Mode

SV2 Touchpad Lock

SV2 Type Value Reset

SV2 Temperature Calibration

SV2 Wifi

Oiling the cedar

Cleaning the spa

Frequently Asked Questions

To ensure proper weight distribution and prevent point loading, our products are placed on 100mm timber bearers. If the desired location is firm and level, you are good to go.

Electric Bathtub: 1.5kW/10amp
1.6 Round Spa Pool: 1.5kW/10amp
1.9 Round Spa Pool: 3.0kW/15amp
2.2 Round Spa Pool: 3.0kW/15amp
2m x 2m Square Spa: 3.0kW/15amp
Plunge Spa Pools are equipped with an external 8.8kW SV Series Heat Pump.

The power cords for Stoked Products are 2m in length.

Stoked products come on timber bearers at 100mm thick, this is to avoid point loading and evenly distribute weight, as long as where the spa is going to be located is firm and level you are all set. Stoked spas are built for a lifetime of relaxation and enjoyment, it’s always worth keeping that in mind when preparing.

Yes, just be sure you have checked local pool fencing regulations and can access the hatch.

All Stoked LTD customers are responsible for consulting and adhering to local legislation before making a purchase. It is important to note that Stoked LTD's guidelines for recommended use are complementary to, and should be followed in addition to, all applicable local legislation.