To ensure proper weight distribution and prevent point loading, our products are placed on 100mm timber bearers. If the desired location is firm and level, you are good to go.

Yes, there is no heat at all on the exterior of the wood-fired hot tub. The burner is located within the hot tub and submerged under the water. As long as your deck is stable and level, it is a great placement choice for your Stoked Stainless product.

Electric Bathtub: 1.5kW/10amp
1.6 Round Spa Pool: 1.5kW/10amp
1.9 Round Spa Pool: 3.0kW/15amp
2.2 Round Spa Pool: 3.0kW/15amp
2m x 2m Square Spa: 3.0kW/15amp
Plunge Spa Pools are equipped with an external 8.8kW SV Series Heat Pump.

The power cords for Stoked Products are 2m in length.

Stoked products come on timber bearers at 100mm thick, this is to avoid point loading and evenly distribute weight, as long as where the spa is going to be located is firm and level you are all set. Stoked spas are built for a lifetime of relaxation and enjoyment, it’s always worth keeping that in mind when preparing.

Yes, just be sure you have checked local pool fencing regulations and can access the hatch.

All Stoked LTD customers are responsible for consulting and adhering to local legislation before making a purchase. It is important to note that Stoked LTD's guidelines for recommended use are complementary to, and should be followed in addition to, all applicable local legislation.

Most woods are okay, such as Pine, Macrocarpa, Oregon and Blue Gum. Avoid hardwood with very high BTU ratings such as Teatree, Kanuka and Manuka, as they will burn too quickly, meaning will be less efficient while using more wood to heat your water.